ASTM D 445 ; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978.

Highly stable viscosity bath temperatures.
Digital measurement and display.

The Viscosity Bath is designed to simplify ASTM D 445; IS-1206 (Part III)-1978 kinematic viscosity testing. A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirring. To further enhance the input, the unit accommodates up to a maximum of six individual capillaries.

The HVB features a measuring range of 5ºC to 230ºC and can be used with mineral oil, silicone oil, or water as the bath media. Bath

temperature is displayed on a bright, easy-to-read digital display. In addition, the unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media.

Features :-

• Accommodates up to six capillary tubes; optional Cannon-Fenske or canon- menin tube holders available

• Measures kinematic viscosity of petroleum products at temperatures from 20ºC to 150ºC, according to ASTM D 445; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978

• Controls bath temperature with ±0.01ºC stability

• Digital bath temperature measurement and display

• Large capacity bath with built-in stirrer, optional illumination

• Integral over-temperature and low bath level protection

Optional :-

1. ‘U’ tube clamp made up of acrylic polycarbonate material

2. Vacuum Gauge attachment accessories

3. Glass ‘U’ calibrated tube of any type

4. On demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliable.